C8+ Fresnel Mod. SFT42R 5000K before and after photos.

All original credit to u/tommydadog as I could not have done this so easily without his guidance in his original post. Original post linked here. Original Post. You will need a 40x28mm fresnel lens, a C8+ and a 3d printer. You need to take the head apart, I.e. pull the bezel and reflector, your 3d printed spacer will go between the lens and the fresnel so bezel-oring-lens-3d printed spacer-fresnel. Spacer STL here, C8+ Fresnel Mod Spacer. I have been using a ton of fun with this so far. Very easy build and turns it into a poor man’s LEP which is always fun! If you decide to build one then enjoy the fun!!!