*Opple LM4
*Lit Duo
*Hopoocolor HPCS-330P
*Sekonic C-800

All lights had to be set to a low-ish level, otherwise they would have blown out the poor Opple.

I used a tripod + claw to hold each light in a fixed position for comparable measurements.

Results are limited to the 3 most common ones on this sub: CCT (K), DUV and CRI (Ra). The Lit Duo does not currently support CRI, so it gets an n.a. once again (du-duun).

The Convoy haul from today!!!

This time I added a bunch of high CCT high CRI lights, as those have been requested 🙂
Seems like today was positive DUV day.

Those deep red measurements were funny and of course entirely useless.
Also do note that the Lit Duo is still on the same pre-release beta firmware as last time.
CCT measurement will be improved according to Lit.

Hopefully no spelling errors in the chart.

by Wormminator

1 Comment

  1. Wormminator

    The GT-FC40 in that M21H started behaving after giving off some smoke.
    Lets not think about this too hard. I am totally sure that it will not burn and die.

Write A Comment