Someone else mounted this Reylight Dawn clip on their Okluma DC0 and it pushed me to try it myself. Mine is the D2 Steel Proof unit. I went with a zirconium clip and white, purple and blue tritium for a clean low-glow look.
I used a 4-40 stainless button head screw with a small spacer from McMaster. I placed the spacers on the front side of the clip with the screws since that gave me the most solid hold. There’s still a little side to side wiggle I’m dialing in but overall I'm pretty stoked!
Part list below if anyone is interested in doing something similar::
- High Strength A286 Stainless Steel Button Head Torx Screw 4-40 thread, 3/16 in long McMaster: 90939A111
- 18-8 Stainless Steel Unthreaded Spacer 3/16 in OD, 3/32 in long, fits #4 screw McMaster: 92320A476
by matnetik
1 Comment
Thank you for posting to r/EDC!
Include a detailed item list (make/model) within **1 hour** of submission.
Lists can go in the title, a comment, or the image.
Posts without lists will be removed. If you have already provided a list, not further action is needed, thanks!
[Rules](https://www.reddit.com/r/EDC/wiki/rules) | [FAQ](https://www.reddit.com/r/EDC/wiki/faq)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/EDC) if you have any questions or concerns.*