I got this crucarta military 2 in the mail today. Brand new outta the box and the centering is awful. This is not a factory second mind you.
by Murky_Dingo_4078
I got this crucarta military 2 in the mail today. Brand new outta the box and the centering is awful. This is not a factory second mind you.
by Murky_Dingo_4078
8 Comments
Only thing I’ve changed is the clip because I can’t stand tip down carry.
Centering is easy to fix. If there isn’t anything wrong with the knife itself, then I would personally keep it. https://youtube.com/shorts/nbsK6NiIHvw?si=ZKE1UnCpQnD-utIq
Well I’d attempt to correct it myself but if it’s more than just a loose pivot screw, I’d return it.
That’s pretty bad. If it’s gonna be a user then it’s an opportunity to mess with taking it apart a little to clean and see if you can get it centered yourself, which shouldn’t be difficult. If it’s a collectible then exchange it for another. But I wouldn’t accept that as is.
Did you try a 1/4 turn on the pivot. They are mass produced so QC missed it.
If you’re comfortable play around with the pivot. Did you buy it from a reputable vendor? More than likely that’s the case….I wouldn’t go crazy trying to fix it, send it back.
Btw the cru Millie 2 is flatly one of my most favorite knafs
If it can be fixed by tightening the pivot, I would keep. But if something was physically wrong with the knife. keeping it from centering correctly, I would send it back if it only cost $30.
If you have the right Torx bits, you can center the blade.