Swapped a HT35 4000k 95cri from Kaidomain into my Convoy T6. CCT is more like 5000k but tint is nice and rosy. Beam profile is identical to the stock sft25r but there is a slight green spot in the middle, hard to get on camera. Thought it was from the green AR lens but it’s still there without the lens. I’ll have to try it out in some different lights.
Throw is about 80% of the stock low cri sft25r 5000k so pretty good considering the cri. Stock was 48kcd and is now 39kcd
by Bean_Master7
3 Comments
Ouuu this would be nice in the T8 too high cri pocket thrower
Using my Opple the CCT is ~4800k on low, ~5100k on medium and ~5500k on high. Duv is around -0.0040 on all outputs and Cri measured at 98
Looks extremely similar to the [Skilhunt SL F35R](https://budgetlightforum.com/t/led-test-review-skilhunt-sl-f35r-3v-5000-k-95-cri-good-high-cri-led-with-small-les-and-high-luminance/231848) and [Fireflies FFL350RD](https://budgetlightforum.com/t/led-test-review-fireflylite-ffl350rd-3500-k-96-cri-good-beam-rectangular-classic-led-chip-but-with-round-cut-out/225095/33). Though FFL350RD is confirmed to be just a [square die](https://budgetlightforum.com/t/led-test-review-fireflylite-ffl350rd-3500-k-96-cri-good-beam-rectangular-classic-led-chip-but-with-round-cut-out/225095/15) with epoxy masking to make it round, not sure about the Skilhunt F35R. The [HT35 is a proper round die](https://budgetlightforum.com/t/led-test-review-fireflylite-ffl350rd-3500-k-96-cri-good-beam-rectangular-classic-led-chip-but-with-round-cut-out/225095/60), so maybe efficiency is better than FFL350RD
Hmmm. It could make several of multi-emitter / TIR lights a bit more throwy. I wonder if Convoy will be offering those emitters.